[Wii ] 改機新晶片: Wasabi

看板Modchip (改機)作者 (三顆骰子)時間18年前 (2008/03/01 05:53), 編輯推噓5(506)
留言11則, 6人參與, 最新討論串1/1
有新的晶片...Wasabi http://www.wasabi.net.cn/ Features 特色 * Direct boot of Wii and Gamecube original, import, and backup discs 直讀Wii/GC 原版,跨區,或備份片 * Supports all chipset versions: DMS, D2A, D2B and D2C (including D1A) 支援DMS, D2A, D2B and D2C(包含D1A) * Supports all regions, configurable via jumpers 可在各區主機上使用,用jumper設定 * Fully upgradable from DVD (no external programmer required) 支援使用DVD升級 (不需另外晶片燒錄器) * Only 5 wires on DMS, D2A, D2B 在DMS, D2A, D2B上使用五條線 * Only 9 wires on D2C (only 3 of them soldered to pin/via) 在D2C上使用九條線 (只需其中三條接在晶片腳上) * Very easy installation on "cut-pin" drives 斷腳機也好安裝 * On-board flash (128KB) 晶片上附128KB記憶體 * Integrated Audiostreaming fix for GC games 包含GC audio-fix * Excellent media compatibility (supports DL media) 片子相容度高 (支援DL 雙層片) * Works with SMG and SSBB 可以跑銀馬和大亂鬥 * Flash recovery mode 含復原模式 (把晶片刷回出廠狀態?) * Two LED for easy installation troubleshooting 兩個LED指示燈 * Full firmware control even on D2C chipset 在D2C上也有韌體控制 (指有辦法在D2C上更新晶片的韌體????) * Drivecode symmetry between all chipset versions 程式碼在各種主機上的對稱性(相似?) (啥??) * Compatible with all GC and Wii homebrew programs 支援GC和Wii的homebrew (Wii homebrew離正式完全破解還有一段咧) * No extra wires required for region override 開啟跨區不需另外加線 * No external switch required 不需加開關 Did you know that current ISO dumpers are currently missing a few KB of data stored in the barcode (BCA) and lead-in area ? This "extra" data could be read by the console and used to detect chips. SMG and SSBB are the first games to call one of the related drive commands, without interpreting the data yet. We take that as a warning. Thanks to on-board memory, the "extra" data of your whole game collection could be stored on the chip itself if that becomes necessary. The flash memory is also used to store the drivecode and could store patches and Wii/GC binaries in the future. 這段基本上說,目前抓iso的軟體都有漏抓了一些barcode (BCA)或lead-in area (有人能解釋嗎?) 而他們有加記憶體的晶片代表假如有需要的話,可以放到晶片裡 讓wii要讀這區域時從記憶裡讀,或是放些更新或補丁之類的 (而此得證其他晶片是俗辣,叫人買他們的) -- ※ 發信站: 批踢踢實業坊(ptt.cc) ◆ From: 129.128.214.143 ※ 編輯: threedices 來自: 129.128.214.143 (03/01 05:54)

03/01 13:24, , 1F
不知道嗆不嗆...
03/01 13:24, 1F

03/01 14:13, , 2F
D1A是啥啊?9線跑D2C蠻威的……
03/01 14:13, 2F

03/01 14:33, , 3F
很像不錯唷!~推推!
03/01 14:33, 3F

03/01 16:24, , 4F
D1A指晶片為 GC2-D1或GC2-D1A,但晶片跟
03/01 16:24, 4F

03/01 16:25, , 5F
D2C用的通 所以被當作D2C改
03/01 16:25, 5F
增加自己翻譯 ※ 編輯: threedices 來自: 68.148.225.101 (03/01 16:49)

03/01 17:55, , 6F
這樣看起來很好用啊...
03/01 17:55, 6F

03/03 21:20, , 7F
也就是說就算改完機可以讀到備份片,但
03/03 21:20, 7F

03/03 21:20, , 8F
是因為dumper漏掉一些位於條碼及導入區
03/03 21:20, 8F

03/03 21:21, , 9F
的位元組,當機器讀不到這些訊息時,就
03/03 21:21, 9F

03/03 21:21, , 10F
判定片子讀的到是因為裝有改機晶片,是
03/03 21:21, 10F

03/03 21:22, , 11F
這個意思嗎?
03/03 21:22, 11F
文章代碼(AID): #17o7xFD3 (Modchip)
文章代碼(AID): #17o7xFD3 (Modchip)